Nova 5bySupaHuman

Workplace profiling for apprentices · Australia

The apprentice's on-the-job record, kept with their learning.

An apprentice says what they did at work. Nova sets it out as a weekly card matched to the workplace tasks their units require. They check it, their supervisor signs it on a phone, and you see who is on track and what evidence is still missing before the final assessment. Starting with electrical apprentices in Australia.

  • Two minutes on a phone at the end of the week
  • Tasks in the national register's own words
  • The supervisor signs from a link. No account, no app
  • Learning and workplace evidence in one place

A weekly card, as the apprentice sees it

"Ran and terminated the submains to the new switchboard, wired the pump controller, found a tripping RCD."

  • Tue · 4 h · supervisedRan and terminated submains to the new switchboardUEEEL0023 · Terminate cables, cords and accessories for low voltage circuits
  • Wed · 3 h · supervisedWired the pump controllerUEEEL0005 · Develop and connect electrical control circuits
  • Thu · 1 hFound a tripping RCDDid you isolate it and prove it dead yourself? Yes · No

Checked by the apprentice. Signed by the supervisor. An example card, with the register's unit titles.

In plain terms

What workplace profiling in Nova is.

Profiling is the trade's word for the record an apprentice keeps of real work done on the job, confirmed by a licensed supervisor. Some of what an electrical apprentice must show cannot be shown in a classroom, and an RTO will not put them forward for the final assessment (the capstone) until that evidence is complete. Nova keeps that record in the same place as the apprentice's learning. The apprentice says what they did, Nova sets it out against the workplace tasks on the national register, the apprentice checks it, and the supervisor signs it. Nova does the setting out. People do the deciding.

At a glance

For
RTOs and TAFEs training electrical apprentices in Australia, first. Any trade whose units carry the register's workplace mark follows the same way
Qualification
UEE30820 Certificate III in Electrotechnology Electrician, the path to an electrician's licence
Input
What the apprentice says they did, spoken or typed on their phone, with photos
Output
A weekly card: each job, the day, how long, how closely supervised, and the register's workplace tasks it shows
Sign-off
The workplace supervisor reads and signs on their phone from a link. No account
Progress
A task counts once it is on two signed cards. Unit by unit: shown twice, shown once, not yet
Availability
Part of Nova 5 for RTOs and TAFEs in Australia, starting with electrical apprentices. What you get
Start
Book a trial call or tell us about your apprentices

Four people, one record

Profiling today lives in a separate system, and four people pay for it.

Learning sits in one place and the on-the-job record in another. Cards get chased, gaps turn up late, and evidence is assembled by hand before the capstone.

THE RTO OR TAFE

Early warning, and evidence ready for the assessor

Today: chasing apprentices for cards, finding gaps late, assembling evidence by hand. What they want: one place for learning and workplace evidence, a view of who is behind, and each unit's evidence in one place when the assessor needs it.

THE APPRENTICE

Two minutes on a phone, and what to ask for next

Today: a form filled line by line every week, ticking tasks from long lists in formal language. Many fall weeks behind. What they want: to say what they did at the end of the week and know which work to ask their supervisor for next.

THE WORKPLACE SUPERVISOR

A card they can read properly in a minute

A licensed tradesperson asked to approve cards they have little time to read. Regulators have warned that sign-off must not be a tick and flick. What they want: a card that reads clearly on their phone, with no account to manage.

THE TRAINER AND ASSESSOR

Who is stuck, and why

Today: evidence for a unit is scattered across weeks of cards, and it is hard to see who is behind. What they want: a view of who needs help, and each unit's evidence gathered in one place.

How it works

Say it. Check it. Get it signed.

Seven steps from set-up to the capstone. The apprentice has their say at every one, and a person signs every card.

  1. STEP 01 · SET-UP

    Nova spots the learning spaces that need it

    When you set up a course, Nova reads each unit on the national register. Where units have tasks that must be shown in a real workplace, it offers to turn profiling on for that course. One press. Nothing to configure. A course with no workplace tasks is left exactly as it was.

  2. STEP 02 · THE APPRENTICE

    The apprentice says what they did

    At the end of the day or week, on their phone, they speak or type a few sentences. They can add photos of the work. Spoken, typed, rough or tidy all work.

  3. STEP 03 · NOVA

    Nova sets it out as a card

    Each job becomes a line: what they did, the day, how long, how closely they were supervised, and the workplace tasks it shows, named in the register's own words.

  4. STEP 04 · THE APPRENTICE

    The apprentice checks it

    They read every task being claimed. Where Nova cannot tell whether they did something themselves, it asks a plain yes or no question and leaves that task off until they answer. They can change, add or remove any line.

  1. STEP 05 · THE SUPERVISOR

    The supervisor signs

    The card goes to their workplace supervisor, who opens a link on their phone, reads it and signs on screen. No account, no app.

  2. STEP 06 · PROGRESS

    Progress counts up

    A task counts once it is on two signed cards, because the units ask for evidence on two separate occasions. The apprentice sees, unit by unit, what is shown twice, shown once and not shown yet, and which task to ask their supervisor for next.

  3. STEP 07 · THE RTO

    The RTO sees the whole picture

    Who is on track, who has missed weeks, which cards are waiting on a supervisor, and when an apprentice has shown every task and is ready to be considered for the capstone.

Built on the register

Matched to the workplace evidence requirements on the national register.

The tasks are the register's own, word for word. No points or weightings invented by a vendor.

The requirement, in plain terms

  • Ten units of the electrician qualification mark some of their required evidence with a hash symbol on the national register, training.gov.au.
  • The register says those items "must be gathered in authentic workplace operational conditions (not simulated)" before an apprentice can be judged competent.
  • Every unit asks for its evidence "on at least two separate occasions".
  • Across the ten units' current releases there are 117 such tasks.

What Nova does with it

  • Reads those tasks straight from each unit's own document on the register. No AI is involved in reading or wording them.
  • Shows each task to the apprentice exactly as the register words it.
  • Counts a task as shown only when it appears on two separate cards a supervisor has signed.
  • Notices when the register releases a new version of a unit and offers to read it again. Cards already signed stay counted under the rules they were signed under.

The ten units with workplace tasks · UEE30820

  1. UEEEL0003Arrange circuits, control and protection for electrical installations12 tasks
  2. UEEEL0005Develop and connect electrical control circuits4 tasks
  3. UEEEL0008Evaluate and modify low voltage heating equipment and controls3 tasks
  4. UEEEL0009Evaluate and modify low voltage lighting circuits, equipment and controls10 tasks
  5. UEEEL0010Evaluate and modify low voltage socket outlets circuits9 tasks
  6. UEEEL0012Install low voltage wiring, appliances, switchgear and associated accessories11 tasks
  7. UEEEL0014Isolate, test and troubleshoot low voltage electrical circuits37 tasks
  8. UEEEL0018Select wiring systems and select cables for low voltage electrical installations14 tasks
  9. UEEEL0023Terminate cables, cords and accessories for low voltage circuits11 tasks
  10. UEEEL0024Test and connect alternating current (a.c.) rotating machines6 tasks

Counts are from the units' current releases on training.gov.au. The qualification's implementation guide supports using workplace logbooks, journals or a profiling system, and names no required tool.

NOT ONLY ELECTRICAL

Any unit that carries the workplace mark

Nova does not look for a unit code. It reads any unit from the register and looks for the workplace mark. Any trade whose units carry it is picked up the same way. Today that is the electrician units, and we are starting there with Australian RTOs and TAFEs.

READY FOR 2027

New units mean a new read, not a rebuild

Powering Skills Organisation is rewriting the electrician qualification, with release expected around mid-2027. It has said it will not mandate any particular e-logbook or workplace evidence system. Because Nova reads its rules from the register, the new units will be read the same way once they are published.

What makes it different

Five things a separate profiling tool cannot do.

01

Say it, don't fill it in

Most profiling tools are forms. Here the apprentice talks or types for a minute and checks a card. Spoken, typed, rough or tidy all work.

02

Built on the register

The tasks are the national register's own, word for word. No scoring scheme invented by a vendor.

03

Learning and evidence in one place

Nova already holds the apprentice's units, activities and coach. A task they have not done yet can sit beside the lesson that teaches it.

04

It asks rather than assumes

If the apprentice did not say they did something themselves, Nova does not claim it for them. It asks, and waits for the answer.

05

It sets itself up

Nova notices which courses need profiling and offers it. The RTO does not load task lists or build templates.

Where AI helps, and where it does not

Nova proposes. People decide.

A supervisor signs every card and an assessor makes every judgement. The AI's job is the setting out.

Turn what an apprentice says into a set-out cardAI
Match their work to the register's tasksAI
Ask a question when something is unclearAI
Point to the task they have not done yetAI
Confirm what was done, and approve a cardApprentice and supervisor
Judge whether the work was good enoughAssessor
Decide competenceAssessor
Change the register's wordingNobody

The AI never marks a task as shown. A task is shown only when it is on two cards a supervisor has signed. More on how SupaHuman governs AI on the Responsible AI page.

What you get

Everything profiling needs, in the place the apprentice already learns.

Nothing to load, nothing to template. Switch profiling on for a course and the rest follows from the register.

FOR THE APPRENTICE AND SUPERVISOR
  • Speak or type what they did, on their phone, with reminders at the end of the day.
  • A weekly card set out against the register's workplace tasks, in the register's words.
  • A plain yes or no question where Nova cannot tell if they did something themselves.
  • Photos kept as evidence beside each job.
  • Progress by unit: shown twice, shown once, not yet, and the task to ask for next.
  • The supervisor reads and signs a week on their phone from a link. No account.
FOR THE RTO, TRAINER AND ASSESSOR
  • Profiling offered on the courses whose units carry the workplace mark. One press to switch on.
  • Who is on track, who has missed weeks, and which cards are waiting on a supervisor.
  • The trainer's view of who is behind and why, with the lesson that teaches the missing task beside it.
  • Each unit's evidence assembled in one place for the assessor.
  • Readiness for the capstone, shown when every task is on two signed cards.
  • An apprentice's existing history brought across from paper cards or another tool.

Questions

What RTOs ask about profiling in Nova.

Profiling is the record an apprentice keeps of real work done on the job, confirmed by their licensed supervisor. Some of what an electrical apprentice must show cannot be shown in a classroom. The national register marks those items and says they must be gathered in authentic workplace conditions, on at least two separate occasions. An RTO will not put an apprentice forward for the final assessment (the capstone) until that evidence is complete.

No, and we do not claim it is. Nova's profiling is matched to the workplace evidence requirements on the national register, and shows each task in the register's own words. The qualification's official guidance supports using workplace logbooks, journals or a profiling system and names no required tool. No state regulator has been asked to review Nova's record yet.

No. The AI turns what the apprentice says into a set-out card, matches it to the register's tasks and asks when something is unclear. The apprentice confirms every line, a supervisor signs every card and an assessor makes every judgement. A task counts as shown only when it is on two signed cards.

No. The card goes to the workplace supervisor as a link. They open it on their phone, read it and sign on screen. No account, no app to install.

It starts with electrical apprentices in Australia, on UEE30820 Certificate III in Electrotechnology Electrician. Nova reads any unit from the national register and looks for the workplace mark, so other trades whose units carry it can follow. It does not cover other trades today, and it is not yet available in New Zealand.

Nova reads its rules from the register, so new units mean a new read rather than a rebuild. When a unit is re-released, Nova offers to read it again. Cards already signed stay counted under the rules they were signed under. The 2027 units are not yet published, so Nova does not support them yet.

Profiling is part of Nova 5. Set up your electrical course and Nova offers to switch profiling on for it. Existing apprentices can have their history brought across from paper cards or another tool. Book a trial call and bring a unit you deliver, or tell us about your apprentices and we will reply within one business day.

Talk to us

Train electrical apprentices?

Tell us about your apprentices and how you keep profiling today, and we will show you the same week on Nova. One reply, from a person.

No spam, no list. One reply from a person.

Profiling is one part of Nova 5. See what else Nova 5 does for apprentices and the RTOs that train them.